Check Out Our Used Woodworking Machinery Inventory!
Check Out Our Used Woodworking Machinery Inventory!
Ready to Deliver Before the Year End!
Holzher 1057 STREAMER Edgebander
SOLD
• Pre-Milling (FG201) with diamond tooling
• Magazine for coil and strips (1903)
• GluJet-S with hybrid technology (GJ-201)
• Pressure Section (1912-3)
• 2 Motor End Trimming (1918P)
• Top and Bottom Trimming (FR201)
• Profile Scraping (1929)
• Buffing (1940)
• Manual control panel
• Conveyor speed 10 m/min.
• Edge thickness 0, 4 – 6 mm.
• Panel thickness 6 – 60 mm.
• One (1) centrally located hand-wheel, for raising and lowering of the top
pressure beam.
• Fixed workpiece support at 380 mm
• Manual central lubrication of the transport chain
$41,000
C.R. Onsrud 360G18W CNC Router SOLD
This CNC Router package included the following items:
12’ wide x 30’ long work envelope
LARGE CNC
– OSAI PC Front Series 10/510i System – OSAI PC Front w/High Res touch screen, network capability, PLC Machine Controller, plus adds OSAI Digital Drives, Amps, and Servos
– 18 HP Spindle w/HSK-63 Spindle Taper – 24,000 RPM – HSD ES988 Spindle
– 12 Tool – Dynamic Automatic Rotary Tool Changer – Fully Servo controlled
– Dekker 60 HP Vac Pump
$199,000
2007 C.R. ONSRUD MODEL 98HD18 “Extreme Duty Series” CNC ROUTER
SOLD
(61″X98” axis travel) – with: Oversized Extra Thick Cast-Iron Fixed Bridge & Oversized Extra Thick Cast
Iron Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Bridge, Twin Moving Table Design with 4000″ per minute machining speed, full 3-D capability, 14 inches under bridge clearance & 11 inches of Z axis stroke, 10′ x 15′ footprint, precision ball-screw drives for ALL axes, precision linear guide ways, centralized lubrication system, OSAI Series 10/510i controller, 4-Pole 18HP – 24,000 RPM fully programmable & reversible, variable speed, quick-change spindle, with air blast, capable of routing & drilling, programmable feed rates with override capability. Twin aluminum tables – function as independent 61” x 49” tables.
$119,000
2016 SNX NVision Contour Edgebander
Working Dimensions:
Edge Coil Thickness: 0.5 – 3mm (0.5 thin tape ONLY with proper low temp adhesive)
Work piece min: Diam.150 mm
Work piece max: 2400 x 2400mm
Work piece Thickness: 10 – 60mm
Edgeband Thickness: 0.5mm /.020” to 1 mm for panels up to 60mm thick
2 mm for panels up to 60mm thick
3 mm for panels up to 45mm thick
Minimum Outside Radius: 30 mm (note: based on 1mm thickness of edge tape)
Minimum Inside Radius: 150 mm
Feed (Rotation) Speed: 5 m/min
Air Requirement: 6 bar (90 psi)
Electrical Requirements: 230v, 3ph, 10 amp circuit
$59,000
1999 C.R. ONSRUD MODEL 96C10 CNC ROUTER
SOLD
(– 98″ x 50″ axis travel with 11” of Z-axis travel, (14” bridge clearance)
– 10 HP Colombo variable speed spindle with 8-position automatic tool changer
– ISO-30 type tool holders, (set included)
– (2) 48” x 48” moving tables with integrated vacuum system
– Tables operate independent or as one 96” x 48” table
– Tables designed for use with spoil board or pod type vacuum system
– AMC-4 machine controller by North East Electronics
– Precision ball-screw drives on all axes
– THK precision linear guide ways
– Thick cast iron fixed bridge & cast iron vertical supports
– Stress relieved tube steel horizontal base
– (1) 8″ diameter dust outlet
– Approx. 10′ x 12′ overall footprint x 6-1/2′ tall
CR Onsrud Model 288G12 Panel Pro Series CNC Router – 2007
SOLD
ONE USED C.R. ONSRUD MODEL 288G12 “Panel Pro Series” CNC ROUTER
(325″X61” axis travel) – with: Oversized Extra Thick Cast-Iron Fixed Bridge & Oversized Extra Thick Cast
Iron Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Moving Gantry, Fixed Table Design with 2000” per minute machining speed, full 3-D capability, 14 inches under bridge clearance & 11 inches of Z axis stroke, 32′ x 15′ footprint, precision ball-screw drives for Y & Z axes, case-hardened, oversized, precision ground, helical rack & pinion drives for X axis, precision linear guide ways, centralized lubrication system, OSAI Series 10/510i controller, 4-Pole 12.7HP – 24,000 RPM fully programmable & reversible, variable speed, quick-change spindle, with air blast, capable of routing & drilling, programmable feed rates with override capability.
$125,000